A little less guesswork.

FritzZyme 7 calculator

FritzZyme 7 freshwater live bacteria

Read the product guide and worked examples ↓

Choose your product

Change product

Start typing to see matching products, or use the full dropdown below.

FritzZyme 7 freshwater live bacteria

Choose explicitly; different uses or formulations may have different quantities. Use only the water volume specified for that choice.

Water volume

Actual water amount; no decor deduction.

litres

Supports 3.8–100,000 L after displacement. These are software limits, not livestock safety limits.

Review and calculate

Check the product label, water volume and units.

How calculations work

Calculation inputs stay in this page’s URL so Back and Edit can retain them. Saving tanks or a treatment plan on your device is separate and optional.

Clear amounts. Visible assumptions.

Your calculation, explained

Choose a product and enter the water you’re actually dosing.

  1. Check the exact product and formulation.
  2. Use measured water, or make an explicit estimate.
  3. Review the amount, source and any schedule.
Read our calculation method →

Product guide · edited 28 October 2026

Jump to a section
  1. New or established freshwater system?
  2. Worked examples
  3. Before you measure
  4. Does an old PDF override the bottle I have?
  5. Sources and next steps

New or established freshwater system?

FritzZyme 7 has distinct new-system and established-system references. It is not marine FritzZyme 9 or the more concentrated TurboStart 700. Select the stage before calculating.

Worked examples

These illustrations use 100 L of measured water, without a decor deduction. Choose the matching stage or formulation above for your own water volume. They do not select a treatment or establish livestock suitability.

New system

StageAmount or action for 100 L
New-system addition314.36 mL

Established system

StageAmount or action for 100 L
Established-system addition79.25 mL

Example only. Your calculation above uses your own inputs. Small amounts and powder fractions still need equipment that can measure them reliably.

Before you measure

Remove chlorine/chloramine first and follow UV/skimmer and storage directions. Older manufacturer documents differ from the indexed webpage’s maintenance reference; resolve a bottle mismatch before use.

Product-specific checks from the calculation record
  • Remove chlorine/chloramine before adding bacteria, maintain flow/aeration, and stop UV/skimming for at least five days.
  • Do not freeze or overheat; follow the expiry and storage instructions. This freshwater formulation is not TurboStart 700 or a marine product.

Does an old PDF override the bottle I have?

Do not silently combine conflicting instructions. Confirm the formulation and applicable label with Fritz before using a mismatched reference.

Sources and next steps

Fritz manufacturer directions →

Source-access note: the manufacturer site blocked direct retrieval during this edit. Indexed manufacturer text and the existing checked calculation record were used; a fresh live-page verification is not claimed.