A little less guesswork.

Easy Dechlorinator calculator

Aquarium Co-Op Easy Dechlorinator — current measuring-cap bottle

Read the product guide and worked examples ↓

Choose your product

Change product

Start typing to see matching products, or use the full dropdown below.

Aquarium Co-Op Easy Dechlorinator — current measuring-cap bottle

Water volume

Actual water amount; no decor deduction.

litres

Supports 3.8–100,000 L after displacement. These are software limits, not livestock safety limits.

Review and calculate

Check the product label, water volume and units.

How calculations work

Calculation inputs stay in this page’s URL so Back and Edit can retain them. Saving tanks or a treatment plan on your device is separate and optional.

Clear amounts. Visible assumptions.

Your calculation, explained

Choose a product and enter the water you’re actually dosing.

  1. Check the exact product and formulation.
  2. Use measured water, or make an explicit estimate.
  3. Review the amount, source and any schedule.
Read our calculation method →

Product guide · edited 28 October 2026

Jump to a section
  1. How much Easy Dechlorinator treats new water?
  2. Worked examples
  3. Before you measure
  4. Do I enter tank capacity for a small top-up?
  5. Sources and next steps

How much Easy Dechlorinator treats new water?

The current measuring-cap reference is 1 mL per 10 US gallons. Enter the tap-water batch being prepared, including tap water used for a top-up.

Worked examples

These illustrations use 100 L of measured water, without a decor deduction. Choose the matching stage or formulation above for your own water volume. They do not select a treatment or establish livestock suitability.

When preparing new tap water

StageAmount or action for 100 L
When preparing new tap water2.64 mL

Example only. Your calculation above uses your own inputs. Small amounts and powder fractions still need equipment that can measure them reliably.

Before you measure

This tool uses mL; do not infer a universal drop size or multiply the normal result for an emergency. Aquarium Co-Op recommends water changes to remove excess nitrogen compounds rather than relying on conditioner.

Product-specific checks from the calculation record
  • Enter the tap water being treated. This is the normal rate; high-chlorine adjustments are not selected automatically.
  • Maintain aeration. The current directions use mL, with a separate two-drops-per-US-gallon option for small tanks; no pump size is assumed.

Do I enter tank capacity for a small top-up?

For a separately prepared tap-water batch, enter that batch volume. Evaporation top-ups and full water changes are different jobs.

Sources and next steps

Aquarium Co-Op manufacturer directions →

Manufacturer page consulted 28 October 2026. Match the exact bottle and leaflet; editorial review does not establish diagnosis or compatibility.